See picture,this is Open-loop to Closed-loop Conversion oscilloscope waveform,my motor startup failure at this moment. I need some advice how to optimize this waveform,Make this electromagnetic Angle ...
I have a problem with running my CLA CODE when I run my program in flash. When i run thise program in RAM, i don't have these problems. Problem description: CLA TASK1 is triggered by int 6.11 (SD1).
I read the result register for current measurement 1000 times. I found that I got negative value(unit: V), but it shouldn't be like this. here is our pin definition ...
I want to use LM74801 to power mux 2 batteries but also allow it to conduct reverse current from my load (motor). The DS states that LM74801 allows bi-directional current if the C pin is left ...
I am puzzled by an element of the filter design found in SNVA886: Reduce Conducted EMI in Automotive Buck Converter Applications. A 2k resistor (RF2) appears in parallel with the ferrite (LF2), and is ...
This thread has been locked. If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this ...
I want to ask a question about F280025C EPWM . when I follow the steps of research explorer epwm lab , I encourter some bugs ,I don't understand how to solve these bugs.
Is Motor Control GUI same as InstaSPIN Universal GUI. Also, In the webpage for C2000SDK Motor Control SDK mentions MOTOR-CONTROL-GUI and MCU-MOTOR-CONTROL-GUI. Is both the same? If not, what is the ...
If the device is disabled, but a voltage is present at the VOUT, what is the expected leakage at the VOUT pin (preferrably over PVT)? Bias voltage is 5.3V.
If you are wanting to configure a peripheral register as a DMA source or destination address, you want to use the "Manual" or "Variable/Function Name" options. Please see the explanation on the thread ...
I am using the TMS570LC4357 development board. Currently, I can successfully run the TMS570LC43x_rtiBlinky_BL_APP20020.bin using the Hercules_Ethernet_Bootloader. However, when I load my own created ...