See picture,this is Open-loop to Closed-loop Conversion oscilloscope waveform,my motor startup failure at this moment. I need some advice how to optimize this waveform,Make this electromagnetic Angle ...

I have a problem with running my CLA CODE when I run my program in flash. When i run thise program in RAM, i don't have these problems. Problem description: CLA TASK1 is triggered by int 6.11 (SD1).

The Teaching Your PI Controller to Behave article links (1-10) are not working. Can I have the links to the pdf files please Or Please point me to the righ urls.

I want to use LM74801 to power mux 2 batteries but also allow it to conduct reverse current from my load (motor). The DS states that LM74801 allows bi-directional current if the C pin is left ...

I am puzzled by an element of the filter design found in SNVA886: Reduce Conducted EMI in Automotive Buck Converter Applications. A 2k resistor (RF2) appears in parallel with the ferrite (LF2), and is ...

I want to ask a question about F280025C EPWM . when I follow the steps of research explorer epwm lab , I encourter some bugs ,I don't understand how to solve these bugs.

If the device is disabled, but a voltage is present at the VOUT, what is the expected leakage at the VOUT pin (preferrably over PVT)? Bias voltage is 5.3V.

If you are wanting to configure a peripheral register as a DMA source or destination address, you want to use the "Manual" or "Variable/Function Name" options. Please see the explanation on the thread ...

I am using the TMS570LC4357 development board. Currently, I can successfully run the TMS570LC43x_rtiBlinky_BL_APP20020.bin using the Hercules_Ethernet_Bootloader. However, when I load my own created ...

1. I want to run my msp430 at 100Khz only. What to do for that & for its calibration. Grace allow me to set 100Khz (set to 99.xx Khz automatiaclly), with +-10%. I want to have 100K with much more ...

Need to drive analog PAL video over 5 meters coaxial cable, therefore it looks like capacitive AC-coupling is required. The question is if the OPA692 can drive the 75R coax load via large serial ...