See picture,this is Open-loop to Closed-loop Conversion oscilloscope waveform,my motor startup failure at this moment. I need some advice how to optimize this waveform,Make this electromagnetic Angle ...
I want to use LM74801 to power mux 2 batteries but also allow it to conduct reverse current from my load (motor). The DS states that LM74801 allows bi-directional current if the C pin is left ...
I am puzzled by an element of the filter design found in SNVA886: Reduce Conducted EMI in Automotive Buck Converter Applications. A 2k resistor (RF2) appears in parallel with the ferrite (LF2), and is ...
I read the result register for current measurement 1000 times. I found that I got negative value(unit: V), but it shouldn't be like this. here is our pin definition ...
So at this point, we are trying to use MCU to overwrite the current and clear the Dead Battery Mode. Could you help to support: 1. Which register to over write the charging current? Is that possible ...
The ADS1248 is only specified to 105C, so it is possible you are getting issues because you are nearing (or exceeding) this rating. What exactly are the issues? Can you describe them in more detail, ...
To troubleshoot, I tried loading it from U-Boot. When using signed remote core firmware, the authentication verification passed successfully. However, when using ...
We are using TAC5112 Audio Codec in our design with single ended audio output from the audio codec. We are trying to play stereo I2S audio data (for ex. simple 1kHz sine tone) and we are getting the ...
I need Ucc28180 IC's Unencrypted lib file. If any one have kindly reply to me. Hi, @Tony Hsu Did you got a ucc28180 Unencrypted lib file. Or how you solved gate ...
Order of millivolts output swing to be fed into an ADC I'm using currently using TINA-TI to simulate the TIA, with the ultimate goal of producing a tangible physical version of the circuit in the ...
Customer just build their board based on AM64x. Their board does not have SD card, only have eMMC. They are using SDK10.0. Today they are bringing up their board, and they could use USB-DFU to boot ...